=====Step by Step Instructions=====

\\
====› How to Fit Pipe==== 

  * Step 1. Create a [[piping_system|Piping System]]

  * Step 2. Add one or more [[pipeline_list|Pipe Lines]]

  * Step 3. Fit pipe to scan data using [[fit_pipe|Fit Pipe at Seed]]

  * Step 4. Insert Valves, Tees and Elbows using [[insert_fittings|Insert Fittings]] 

  * Step 5. [[Export Pipelines]]  

\\
====› How to Create a Mesh====

  * See: [[meshing_tools|Meshing Tools]]

\\
====› How to Isolate / Classify Scan Data==== 

  * Step 1. Create a [[Point Group Set]]

  * Step 2. Add one or more [[Point Groups]]
  
  * Step 3. Select an area of scan points using one of the four [[shape|Area Selection Tools]] 

  * Step 4. Assign the selected points to a [[point_groups|Point Group]]

  * Step 5. Switch the [[Shape]] tool to single selection Point {{:singlepoint32.png?nolink&28|}} mode (keyboard shortcut Alt+P) 

  * Step 6. Clear the selection using the {{:clearselection_32.png?nolink&28|}} [[cloud_selection|Clear Selection]] icon

  * Step 7. If desired, export a [[point_groups|Point Group]] or a selection of scan points using [[Batch Point Cloud Export]]

\\
====› Export an Area Selection==== 

  * Step 1. Select the area of interest in the point cloud using one of the four [[shape|Area Selection Tools]]
  
  * Step 2. Switch the [[Shape]] tool to single selection Point {{:singlepoint32.png?nolink&28|}} mode (keyboard shortcut Alt+P)

  * Step 3. With the mouse, click on one of the selected scan points

  * Step 4. Open [[Batch Point Cloud Export]] to export the selection 

\\
====› Change Coordinates==== 


  * See: [[Transformations]]
 

\\
====› Add a Cyclone Registration====

  * See: [[Cyclone Registrations]]


\\
====› Center on a Scan / Bring Object into View====


  * When a scan or other object is a far distance from 0,0,0 coordinates or far from the camera's position, use the 'Find' option to bring it into view.

{{:scan_find_scene_explorer.mp4?nolink&848}}