Kohera3D

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====Mouse and Camera Navigation=====

\\
====Camera Navigation Mode====

Camera Navigation Mode is accessed through the [[Application Menu]].

{{:camera_navigation_mode.png?nolink|}}

**The Camera Mode Options are:**

**Native:**
  * Rotate: Hold down the CTRL key while you click and drag with the mouse. 

  * Pan: Hold SHIFT while you click and drag with the mouse. Use both mouse buttons for finer control. 

  * Zoom: Hold down CTRL and SHIFT while you click and drag with the mouse. Move the mouse right to zoom in, or left to zoom out.

  * Field of View: Hold down CTRL and SHIFT while you click with the center mouse button and drag. To fix distortion, press 'R' on the keyboard or the 'Reset' button on the ribbon. 

**Mouse Only:**
  * Rotate: Hold down the center mouse button and drag the mouse.       

  * Pan: Hold down the right mouse button and drag. 

  * Zoom: Roll the scroll wheel of the mouse to zoom by moving the camera. 

  * Field of View: Hold down both the right and center mouse buttons and drag the mouse. 

**AutoCAD Style:**
  * Rotate: Hold down the SHIFT key while you click with the center mouse button and drag. 

  * Pan: Click and drag with the middle mouse button. 

  * Zoom: Roll the scroll wheel on the mouse. 

  * Field of View: Hold down the SHIFT key and both the center and right mouse buttons and drag the mouse. 


 :!: Note 1: For slower movement and finer control, hold down the CTRL key along with any of the above navigation modes. 

 :!: Note 2: Changing the 'Field of View' may cause the view to appear distorted. To fix the distortion, press 'R' on the keyboard or the 'Reset' {{:camerareset32.png?nolink&22|}} button on the ribbon.

\\
----

====Changing the Center of Rotation====

How to change the camera's center of rotation or pivot point when navigating:  

  - Go to [[home_tab|Home]] > Selection > [[Shape]], and choose the {{:singlepoint32.png?nolink}} Point (default) tool.
  - Using the Point tool, click a scan point in the Scene viewing window for your new center of rotation or pivot point. 
  - Now press keyboard shortcut 'C' to center on the scan point, or press the {{:center32.png?nolink|}} Center icon which is located under [[home_tab|Home]] > Navigation. 

{{:navigation_center.mp4?nolink&848}}
Kohera3D

User Tools

Site Tools

Page Tools
