Kohera3D

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====Point Cloud Coloring=====

The Point Cloud Coloring tools are accessible via the {{:renderbyscan32.png?nolink|Point Cloud Coloring}} **Point Cloud Coloring** icon found in the main upper toolbar under '[[home_tab|Home]] > Display'.

**Options found in the pull-down ↓** 

{{:renderbyvgs32.png?nolink|Point Group Color}} Point Group Color

This mode displays the various [[point_groups|Point Groups]] for scans that have been assigned (i.e. segmented, isolated, classified) to a point group layer via the Kohera3D Spectrum module.   

{{:renderbyscan32.png?nolink|Color By Scan}} Color By Scan (default)

In this mode, point clouds are assigned a base color by rotating through 15 different colors. This mode makes it easier to see which scan produced which points. If more than 15 scans are present, the colors will be repeated.


{{:renderasscanned32.png?nolink|Color As Scanned}} Color As Scanned (use this option to view colorized scans)

This mode displays the color from a colorized scan file when color is available. Otherwise it behaves as "Uniform Scan Color," that is, grayscale.

{{:renderbyintensity32.png?nolink|Intensity As Hue}} Intensity As Hue

All points are colored based on their intensity value.

{{:rendersame32.png?nolink|Uniform Scan Color}} Uniform Scan Color

This mode assigns a single base color to all scans. The default base color is white. The base color can be changed using the Options dialog found in the [[application_menu|Application Menu]].
Kohera3D

User Tools

Site Tools

Page Tools
